Industrial Pharmacy · Short notes

Pharmaceutical Unit Operations: Short Notes & Cheat Sheet

Industrial Pharmacy I: size reduction and the mills used, size separation, mixing and segregation, drying and the drying rate curve, filtration, evaporation and distillation.

Short notes

Read these before you attempt the topic's MCQs.

Unit operations in a wet-granulated tablet

1MillingSize reduction2SievingSize separation3MixingDrug + excipients4GranulationBinder solution5DryingFluidised bed6CompressionAfter lubrication
A single tablet passes through most of the unit operations; each step can introduce its own defects.

Size reduction

  • Mechanisms: cutting, compression, impact and attrition (rubbing).
  • Hammer mill: impact; the most widely used. Ball mill: impact and attrition; it works best at about 65–80% of its critical speed, and above critical speed the balls stick to the wall and grinding stops.
  • Fluid energy (jet) mill: particles collide in high-velocity air, giving micronised powder (a few micrometres) with no heat build-up, suitable for heat-labile drugs.
  • Cutter mill for fibrous material; colloid mill for emulsions and suspensions; roller mill for crushing.
  • Energy laws: Rittinger for fine grinding, Kick for coarse crushing, Bond in between.

Separation and mixing

  • Sieve number is the number of openings per linear inch, so a higher number means a finer sieve. Cyclone separators and air classifiers separate by size in an air stream.
  • Powder mixing works by convection, shear and diffusion. Differences in particle size, density and shape cause segregation (demixing).
  • Tumbling mixers (V-blender, double-cone) for free-flowing powders; ribbon blenders for convective mixing; planetary and high-shear mixers for wet massing.
  • Potent drugs in small amounts are mixed by geometric dilution.

Drying

  • Loss on drying is water as a percentage of wet weight; moisture content is water as a percentage of dry weight. Equilibrium moisture content is what remains at a given humidity.
  • Drying rate curve: an initial adjustment, a constant-rate period (surface water evaporates), the critical moisture content, then the falling-rate period (water must diffuse from inside).
  • Tray dryer: static bed, slow. Fluidised bed dryer: fast and uniform, ideal for granules.
  • Spray dryer: atomises a solution or suspension into hot air; drying takes seconds and evaporation cools the droplets, so it suits heat-sensitive materials and gives spherical particles.
  • Freeze dryer (lyophilisation): freezing, then primary drying by sublimation under vacuum, then secondary drying by desorption; used for heat-labile injections and biologics.

Filtration, evaporation and distillation

  • Darcy's law: filtration rate rises with pressure and filter area, and falls with liquid viscosity and cake thickness.
  • Filter aids such as diatomaceous earth (kieselguhr) keep the cake porous. Membrane filters of 0.22 µm are used for sterile filtration; depth filters trap particles within their thickness.
  • Equipment: filter press, rotary drum vacuum filter, cartridge filters.
  • Evaporators: falling-film and climbing-film types keep contact time short. Distillation: simple, fractional, steam (volatile oils) and vacuum (heat-labile liquids).

Cheat sheet

High-yield facts in one place. Cover the right-hand column and test yourself.

Mill → mechanism · use

MillMechanism · use
Hammer millImpact · general use
Ball millImpact + attrition · fine, wet or dry
Fluid energy millParticle collision · micronising
Cutter millCutting · fibrous crude drugs
Colloid millShear · emulsions, suspensions
Roller millCompression · crushing

Dryer → best for

DryerBest for
TraySmall batches, simple drying
Fluidised bedGranules, fast uniform drying
SpraySolutions to powder, heat-sensitive
FreezeBiologics, heat-labile injections
VacuumHeat-sensitive, solvent recovery
DrumSlurries, pastes

Memory aids

Constant then Falling
Drying first removes surface water at a constant rate, then slows as water must diffuse out.

Exam traps

  • A ball mill above its critical speed stops grinding; the balls just spin with the wall.
  • Spray drying suits heat-sensitive drugs because contact time is short and evaporation cools the droplet.
  • Freeze drying removes water by sublimation, not by melting.
  • A higher sieve number means a finer sieve.

Revised? Now test yourself.

Attempt the Pharmaceutical Unit Operations MCQs while the notes are fresh. Anything you get wrong is saved to your incorrect list for the next revision round.

More Industrial Pharmacy notes